Repair

Darn a small hole in wool

A small hole in a wool garment can be darned so the garment lasts for many more years. Darning weaves new threads across the hole, and it is fine for the darn to show.

Back to Supersoft hood SS2022

What you need

  • Wool yarn of about the same thickness, in the same colour or a contrast colour you like
  • A darning needle with a blunt tip
  • A darning mushroom, a wooden egg or an orange
  • Small scissors

Steps in this guide

  1. Look at the damage

    This method suits small holes, up to about one centimetre.

    Look for loose stitches around the hole. Run a thread through any loose stitches so they do not unravel further while you darn.

    Tip: Many small holes at once may be moths. Look for larvae and silky threads in the garment and in the wardrobe.

  2. Thread the needle

    Cut a length of about 50 cm and thread the needle. Do not tie a knot; you will secure the ends at the end.

    A thin yarn gives a darn that lies flat. If your yarn is thicker than the garment, you can split it.

  3. Support the fabric

    Place the darning mushroom under the hole, on the wrong side. The fabric should lie smooth and taut, but not stretched out of shape.

  4. Sew vertical threads

    Start about one centimetre outside the hole, in intact knitting. Sew small stitches up and down in close, parallel rows until the hole and its edges are covered.

    Leave a small loop at each turn so the darn does not pull the fabric tight.

  5. Weave across

    Now weave the yarn horizontally, over and under the vertical threads. Alternate the order on each row to build a woven pattern.

    Push the rows close together with the needle. Continue until you are one centimetre past the hole on the other side.

  6. Secure and steam

    Run the ends into the wrong side for a couple of centimetres along the darn, then trim them. Do not knot.

    Steam the area lightly so the darn settles.

When should you ask us?

Large holes, holes in seams and edges, or damage you are unsure about often need someone to look at them. Contact customer service, or bring the garment to Torsdagsbutikken, our Thursday shop in Oslo.

Questions and answers

How do I darn a small hole in a wool garment?

Place a darning mushroom under the hole, and sew close, vertical threads across it, starting about one centimetre outside the hole in intact knitting. Then weave the yarn across, over and under the vertical threads. Run the ends into the wrong side without knotting, and steam the area lightly.

How big a hole can I darn myself?

This method suits small holes, up to about one centimetre. Large holes, holes in seams and edges, or damage you are unsure about often need someone to look at them. Contact customer service, or bring the garment to Torsdagsbutikken, our Thursday shop in Oslo.

How do I keep the hole from unravelling further?

Look for loose stitches around the hole, and run a thread through them so they do not unravel further while you darn.

Does the darn have to be invisible?

No, it is fine for the darn to show. Use wool yarn of about the same thickness, in the same colour or a contrast colour you like.

Why are there lots of small holes in my wool garment?

Many small holes at once may be moths. Look for larvae and silky threads in the garment and in the wardrobe.

Related articles

Back to Tools & Guides